Introducing Brønsted acid sites to accelerate the bridging-oxygen-assisted deprotonation in acidic water oxidation | Nature Communications

2023-01-09 20:48:15 By : Ms. lisa lee

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Carousel with three slides shown at a time. Use the Previous and Next buttons to navigate three slides at a time, or the slide dot buttons at the end to jump three slides at a time. Diamond Shape Wire Mesh

Introducing Brønsted acid sites to accelerate the bridging-oxygen-assisted deprotonation in acidic water oxidation | Nature Communications

Sanjiang Pan, Hao Li, … Xiaodan Zhang

Jing Yang, Lei Wang, … Licheng Sun

Linlin Cao, Qiquan Luo, … Tao Yao

Nam Hee Kwon, Minho Kim, … Seong-Ju Hwang

Chunzhen Yang, Gwenaëlle Rousse, … Alexis Grimaud

Jie Dai, Yinlong Zhu, … Zongping Shao

Kun Du, Lifu Zhang, … Tao Ling

Guangkai Li, Haeseong Jang, … Jaephil Cho

Manjunath Chatti, James L. Gardiner, … Alexandr N. Simonov

Nature Communications volume  13, Article number: 4871 (2022 ) Cite this article

Oxygen evolution reaction (OER) consists of four sequential proton-coupled electron transfer steps, which suffer from sluggish kinetics even on state-of-the-art ruthenium dioxide (RuO2) catalysts. Understanding and controlling the proton transfer process could be an effective strategy to improve OER performances. Herein, we present a strategy to accelerate the deprotonation of OER intermediates by introducing strong Brønsted acid sites (e.g. tungsten oxides, WOx) into the RuO2. The Ru-W binary oxide is reported as a stable and active iridium-free acidic OER catalyst that exhibits a low overpotential (235 mV at 10 mA cm−2) and low degradation rate (0.014 mV h−1) over a 550-hour stability test. Electrochemical studies, in-situ near-ambient pressure X-ray photoelectron spectroscopy and density functional theory show that the W-O-Ru Brønsted acid sites are instrumental to facilitate proton transfer from the oxo-intermediate to the neighboring bridging oxygen sites, thus accelerating bridging-oxygen-assisted deprotonation OER steps in acidic electrolytes. The universality of the strategy is demonstrated for other Ru-M binary metal oxides (M = Cr, Mo, Nb, Ta, and Ti).

The oxygen evolution reaction (OER) is one of the pivotal reactions in electrochemical energy storage and conversion1, which is the anodic reaction in water electrolysis2, CO2 electroreduction3, metal-air batteries4,5, electro-winning6, etc. Specifically, the proton-exchange membrane (PEM) water electrolysis devices require OER catalysts with high activity and corrosion resistance in acidic environments7. However, the sluggish kinetics of OER leads to high overpotentials. Even for well-studied benchmark ruthenium oxide (RuO2) catalysts8, the long-term catalytic activity is far less than the targets required for large-scale renewable energy conversion devices7.

The conventional OER mechanism on RuO2 can be described as four sequential proton-coupled electron transfer (PCET) deprotonation steps, in which the protons are desorbed from the oxo-intermediates (and water molecular) and released into the electrolyte directly9. In alkaline solutions, the abundant OH− ions assist this direct deprotonation process10,11. In acidic conditions, however, direct deprotonation becomes difficult due to the high proton concentration in the electrolyte. Accelerating the deprotonation of oxo-intermediates is one promising direction to improve OER kinetics in acidic electrolytes.

Recent research on RuO2 and IrO2 systems showed that the bridging oxygen (denoted as Obri in the following text, a schematic of different oxygen sites is shown in Supplementary Fig. 1) can accept protons from H2O or OER intermediates, providing a new possible path to OER intermediates deprotonation through the participation of Obri8,12,13. A recent study on single-crystal RuO2 has shown that on the RuO2 (110) facet, the OOH* intermediate transfers one proton to the adjacent Obri, forming protonated bridging oxygen (OHbri) and the deprotonation of OHbri is the rate-determining step (RDS)8,13. By switching the facet orientation, the proton adsorption energetics on Obri can be tuned, thus altering the OER activity. However, the facet engineering approach is intrinsically limited to single crystals. Implementing this fundamental finding to improve the performance of industrially scalable and stable catalysts is still an open challenge14. Strategies to regulate the proton adsorption/desorption energetics on Obri and further accelerate this bridging-oxygen-assisted deprotonation (BOAD) process are urgently needed for the development of acidic OER electrocatalysts.

The deprotonation of surface OHbri sites can be described by the Brønsted-type acidity. In heterogeneous solid-acid catalysts such as zeolites15, supported catalysts16, and metal-organic frameworks17, the acidity and density of Brønsted acid sites strongly affect the activity and mechanism of dehydration, isomerization, and cracking reactions. Similarly, it is rational that the deprotonation energetics of surface Obri sites can be optimized by precisely tuning the Brønsted acidity of OHbri, thus the OER kinetics.

We, therefore, hypothesized that a tailored introduction of strong Brønsted acid sites into the RuO2 lattice could optimize the deprotonation energetics of Obri on the catalytic surface. We implemented this strategy through the selective incorporation of tungsten (W) oxides –which have versatile crystal structure18, acid stability19, and unique proton adsorption20,21–to produce flexible surface Obri sites on RuO2.

In this work, we successfully synthesize the Ru-W binary oxide catalysts achieving atomic-level uniform metal dispersion via the sol-gel method. The optimized catalyst demonstrates a 20-fold improvement of intrinsic OER activity compared to pristine RuO2, which also achieves robust stability for more than 550 h of continuous electrolysis with only 0.014 mV h−1 degradation. Electrochemical studies, ex-situ/in-situ near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations prove that the forming of W-Obri-Ru Brønsted acid sites mitigates the too strong proton adsorption energy on Obri of RuO2 and enables an easier proton transfer from the oxo-intermediates to the neighboring Obri, and thus accelerated the overall acidic OER kinetics. Finally, the universality of such a strategy is confirmed in other Ru-M binary metal oxides (M = Cr, Mo, Nb, Ta, and Ti).

We began with the synthesis of the Ru-W binary oxide catalysts via a modified sol-gel method (see Methods). By adjusting the feed ratio of metal precursors, we finally obtained the rutile Ru5W1Ox catalyst with no obvious phase separation, as shown by X-ray diffraction patterns (XRD) (Fig. 1a). The high-resolution transmission electron microscopy (HR-TEM) showed that the as-prepared catalyst was 4–5 nm nanoparticles (Fig. 1b), with a Brunauer-Emmett-Teller (BET) surface area of 53.86 m2 g−1 (Supplementary Fig. 2). The element mapping of Energy-dispersive X-ray spectroscopy (EDX) confirmed the homogeneous distribution of Ru, W, and O in the materials (Fig. 1c–e). The spherical aberration corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) image (Fig. 1f) showed uniformly dispersed bright spots on the nanoparticle, which came from the atomic dispersion of W atoms into the RuO2 lattice. The solid solution feature of Ru5W1Ox was further confirmed by extended X-ray absorption fine structure (EXAFS). According to the Fourier transformed Ru K-edge EXAFS (FT-EXAFS) spectra, the rutile structure was maintained after W incorporation (Fig. 1g). The W atoms demonstrated a completely different coordination environment from common tungsten oxides, with a shorter W-O distance being observed than the WO3 standard (Fig. 1f and Supplementary Fig. 3). The wavelet transformed EXAFS spectra of Ru5W1Ox showed a distinct peak at R ≈ 3.5 Å, k ≈ 11 Å−1, which could be attributed to the W-Ru scattering peak (Supplementary Fig. 4). The Raman spectroscopy of Ru5W1Ox demonstrated a diminished rutile B2g mode (706 cm−1) and a peak rising at 771 cm−1, confirming the formation of W-Obri-Ru structure in the catalyst (Supplementary Fig. 5). All the results above confirmed the atomically dispersed Ru-W solid solution oxide.

a The XRD patterns of different catalysts. No peaks from the segregated phases (WO3 or metallic Ru) were observed in the pattern of Ru5W1Ox. b The HR-TEM image of as-prepared Ru5W1Ox catalyst. c–e The EDX element mapping of Ru, W, and O. f The atomic resolution HAADF-STEM image of Ru5W1Ox. The bright spots were W atoms. g, h The k3-weighted FT-EXAFS spectra of Ru K-edge and W L3-edge. The Ru5W1Ox had a shorter W-O distance than other W oxides, indicating a dense packing local structure. While tungsten oxides possess loose packing structures, this shortened W-O distance verified the incorporation of W into rutile RuO2 lattice. The orange and blue octahedrons represent RuO6 and WO6 octahedrons, respectively.

We then evaluated the OER performance of Ru5W1Ox in a three-electrode system using 0.5 M H2SO4 as the electrolyte. All electrode potential was converted to the reversible hydrogen electrode (RHE). The linear sweep voltammetry (LSV) (Fig. 2a) of Ru5W1Ox showed that the catalyst only needed 227 mV overpotential (η) to reach 10 mA cm−2 current density −58 mV lower than the commercial nano-RuO2 (Sigma-Aldrich, ~20 nm nanoparticles, Supplementary Fig. 6). To systematically compare the OER activity of different catalysts, several other performance metrics were also measured and calculated (Fig. 2b, Supplementary Table 1, and Supplementary Note 1). The OER performance Ru5W1Ox outperformed the nano-RuO2 at all six considered dimensions: The mass-specific activity was improved by 8-fold (750 A gRu−1 of Ru5W1Ox vs. 87 A gRu−1 of RuO2, estimated by total Ru loading mass). When calculated by the total metal loading (Ru+W), the mass-specific activity of Ru5W1Ox was 547 A gmetal−1, 6 times higher than the RuO2 (Supplementary Fig. 8). The turnover frequency (TOF) of Ru5W1Ox reached 0.163 ± 0.010 s−1 (at η = 300 mV), which was a 20-fold improvement from the pristine RuO2 (0.007 ± 0.002 s−1) (Supplementary Fig. 9). The specific activity of Ru5W1Ox was obtained by normalizing the OER current using either the catalyst’s BET surface area or the mercury underpotential deposition (Hg-UPD) determined electrochemical active surface area (ECSA) (Supplementary Fig. 10). Both values surpassed the pristine RuO2 by ca. 2 times at 1.50 V vs. RHE (Supplementary Fig. 11). The apparent activation energy (Ea) was reduced from 42.2 kJ mol−1 to 28.4 kJ mol−1 after W incorporation (Supplementary Fig. 13). The above results verified that the incorporation of W-Obri-Ru Brønsted acid sites improved the OER activity of RuO2 both apparently (by the increase of electroactive surface area) and intrinsically (by the increase of activity of per active site), indicating a lower barrier and a different OER mechanism for Ru5W1Ox.

a The LSV curves of different catalysts with 95% iR compensation. Scan rate: 5 mV s−1. b Summary of some major OER performance metrics of Ru5W1Ox and RuO2. The specific OER activity (jspec) (normalized by BET surface area and Hg-UPD surface area respectively) was calculated at 1.50 V vs. RHE. The apparent activation energy (Ea) was calculated by the OER current of 1.50 V vs. RHE at different temperatures. The TOF and the mass-specific activity were calculated at η = 300 mV based on total metal loading. The error bars are standard deviations of averaging three independent measurements. c The stability comparison between Ru5W1Ox, RuO2, and IrO2. The stability of catalysts was evaluated by chronopotentiometry at 10 mA cm−2.

We next examined the OER stability of Ru5W1Ox in acid using chronopotentiometry at 10 mA cm−2. The catalyst showed no obvious activity decrease in the long-term operation (Fig. 2c). The overpotential was maintained at 235 mV after 550 h of continuous electrolysis, demonstrating a degradation rate of only 0.014 mV h−1, which acted as a highly active iridium-free catalyst in long-term operation in acid electrolytes (Supplementary Fig. 14 and Supplementary Table 8). We also performed the same test on the commercial IrO2 catalyst (~5 nm, BET surface area 11.98 m2 g−1, Supplementary Fig. 15), which was highly stable as expected. And the Ru5W1Ox has shown comparable stability to state-of-the-art IrO2 catalysts. In the intense cycle test, the Ru5W1Ox could also stay active even after 20,000 CV cycles (Supplementary Fig. 16). While the RuO2 showed poor stability in both chronopotentiometry and cycle tests (Supplementary Fig. 17). The morphology and composition of the Ru5W1Ox catalyst didn’t change significantly after electrolysis, as demonstrated by the HR-TEM images and EDX elemental mappings after OER (Supplementary Fig. 18). The in situ EXAFS also indicated that the W-O-Ru structure was retained under OER conditions (Supplementary Fig. 19). At higher electrolysis current densities (100 mA cm−2), the stability of Ru5W1Ox was also maintained within a 100-h test (Supplementary Fig. 20). These data showed that the Ru5W1Ox catalyst is a promising candidate for practical application.

To investigate the protonation/deprotonation on the catalyst’s surface, we then conducted a series of electrochemical experiments correlated with proton transfer. We first examined the cyclic voltammetry (CV) profile differences between Ru5W1Ox and RuO2 (Fig. 3a). The CV of RuO2 included two pairs of redox peaks at ca. 0.65 V and 1.25 V vs. RHE, which were often attributed to RuIII/RuIV and RuIV/RuVI surface redox transitions, respectively22. In contrast, in Ru5W1Ox, the peak at ca. 1.25 V became less prominent, while a large plateau located between 0 V and 0.4 V vs. RHE arose instead. This plateau was similar to the hydrogen desorption peak on WO3 or Pt electrodes20,23,24 (Supplementary Fig. 21), indicating that deprotonation of Ru5W1Ox surface required a much lower potential than RuO2. We also checked the electrochemical behavior of Ru5W1Ox in 1 M HClO4 (same pH as 0.5 M H2SO4). No obvious electrolyte effect could be observed, which indicates that the adsorption of sulfate will not interfere with the surface chemistry of Ru, different from the Ir-based catalysts25,26 (Supplementary Fig. 22).

a Typical CV curves of Ru5W1Ox and RuO2. Scan rate: 200 mV s−1. b Logarithm of OER activity at 1.50 V vs. RHE as a function of pH. c The logarithm plots between MOR current density and concentration of methanol on different catalysts. The current densities in a–c were normalized by BET surface area. The error bars in b, c are standard deviations of averaging three independent measurements. d, e The O 1 s XPS spectra of RuO2 and Ru5W1Ox at different water vapor pressures. Annotations: Olat - lattice oxygen, OHbri – protonated bridging oxygen, OHtop – adsorbed or liquid water molecules, H2O(g) – gas-phase water molecules. f A schematic demonstrated the surface species changes at different water vapor pressures. Orange balls – Ru, Blue balls – W, White balls – O, Red balls – H. The orange and blue octahedrons represent RuO6 and WO6 octahedrons, respectively.

We then examined the correlation between electrolyte pH and OER activity on different catalysts at the RHE scale27 (Supplementary Fig. 23). As shown in Fig. 4b, Ru5W1Ox demonstrated pH-dependent OER activity, with a reaction order (ρ) of −0.71. While for RuO2, the ρ is only −0.19, demonstrating a weak pH-dependence of OER activity, coinciding with the previous report22. This pH-dependent activity difference could be elaborated by the acidity of bridging hydroxyl: the proton dissociation constant (pKa) of Ru-OHbri-Ru >> pH and the Obri sites of RuO2 were saturated by protons within the experimental pH range. Whereas the W-OHbri-Ru showed a stronger Brønsted acidity (pKa of OHbri close to pH), leading to a sensitive pH dependence of OER activity. Further verification of the Brønsted acidity of W-OHbri-Ru sites was given by the 1H solid-state nuclear magnetic resonant (1H-NMR) spectrum, in which a split peak was observed indicating the formation of different OHbri sites28,29 (Supplementary Fig. 24).

a A schematic of the in situ electrochemical measurements. The zoom area illustrates the major components at the measured electrochemical interface. b, c In situ electrochemical O 1 s XPS spectra of Ru5W1Ox. As the potential increased, the OHbri peak decreased accordingly, indicating the deprotonation of W-OHbri-Ru sites during OER. The Obri sites were re-protonated when decreasing the potential. The binding energy of all spectra was calibrated according to the Au 4 f peak at 84.0 eV. The pressure of the XPS chamber was maintained at 0.25 mbar by injecting water vapor.

We next measured the surface OH* coverage on both catalysts using methanol as a molecular probe30,31. The methanol oxidation reaction (MOR) has a well-established mechanism that methanol molecules tend to nucleophilically attack the electrophilic OH*, so MOR will be more active on an OH* dominated surface31. We measured the reaction order of MOR on both catalysts (Fig. 3c and Supplementary Fig. 25) and found that Ru5W1Ox is inert toward MOR, demonstrating a low surface OH* coverage. While RuO2 showed higher MOR activity, indicating the RuO2 surface was dominated by OH*. The above results verified that the deprotonation was easier on Ru5W1Ox under applied potentials.

We finally analyzed the steady-state Tafel plots to study the apparent OER kinetics of different catalysts (Supplementary Fig. 26). The RuO2 showed a 54 mV per decade (mV dec−1) Tafel slope, suggesting that the reaction has a one-electron transfer electrochemical pre-equilibrium step (PES) followed by a pure chemical rate-determining step (RDS) with no electron transfer7,21,22. While Ru5W1Ox showed a 42 mV dec−1 slope. It corresponds to a one-electron transfer electrochemical PES followed by another one-electron transfer electrochemical RDS. We attributed these differences to the different proton binding energy on Obri. Considering the BOAD pathway, protonated Ru-OHbri-Ru might inhibit the chemical proton transfer from the OER intermediates (OH* or OOH*) to the Obri, while the less protonated W-Obri-Ru sites could favor the proton transfer to the Obri, thus shifting the RDS. The detailed deduction and discussion of the Tafel slope refer to Supplementary Note 2.

To obtain further insights into the deprotonation process on Obri, we then carried out NAP-XPS measurements under varied water vapor pressure (Supplementary Note 3). As shown in Fig. 3d, e, four different oxygen species were distinguished by O 1 s XPS spectra: the lattice oxygen (Olat) at ca. 530 eV, the protonated bridging oxygen (OHbri) at ca. 531 eV, molecularly adsorbed water/hydroxyl (OHtop) adsorbed on the coordinatively unsaturated Ru sites (RuCUS) at ca. 533 eV and the gas phase water molecules (H2O(g)) at 534-535 eV32. Under ultra-high vacuum (UHV), RuO2 showed a more than 3 times higher ratio of OHbri species than Ru5W1Ox (Supplementary Fig. 29, Supplementary Table 3 and 4). With the increase in water vapor pressure, the ratio of OHbri in RuO2 increased accordingly (Fig. 3d), which was contributed by the dissociative adsorption of water molecules on the RuO2 surface32 (Supplementary Fig. 30). However, when reduced the pressure to UHV, the OHbri ratio did not decrease accordingly, which verified the strong proton adsorption nature of Obri in the Ru-Obri-Ru structure.

In contrast, several different features were observed in the O 1 s XPS spectra of Ru5W1Ox (Fig. 3e). Firstly, the Olat peak positively shifted by ~0.5 eV, again proving the formation of Ru-W oxide solid solution33. The most prominent difference between Ru5W1Ox and RuO2 lies in the OHbri transition. The OHbri intensity did not change significantly along with the vapor pressure change. Instead, the Olat shifted to lower binding energy, accompanied by valence changing of W from W6+ to W5+, as observed in W 4 f XPS spectra (Supplementary Fig. 31 and Supplementary Table 5). These peak shifts were reversible when sequentially reducing the pressure back to UHV (Fig. 3e). The above results displayed a scenario that the deprotonation of water molecules (or oxo-intermediates during OER) was faster and more reversible in Ru5W1Ox than that in RuO2 (Fig. 3f). Detailed discussions refer to Supplementary Note 3.

The deprotonation process on Ru5W1Ox was further monitored using an in-situ electrochemical NAP-XPS setup (Fig. 4a and Supplementary Fig. 32). As the potential increased, the OHbri peak decreased accordingly, demonstrating a potential-dependent deprotonation scenario (Fig. 4b). When reducing the applied potential, the Obri protonated and formed OHbri again (Fig. 4c), providing evidence of the reversible protonation/deprotonation nature of W-Obri-Ru sites. On the contrary, due to the strong interaction between water and Ru-Obri-Ru, the RuO2 surface was covered by condensed water or OHtop species and the deprotonation of OHbri could hardly be observed upon applying electrode potentials (Supplementary Fig. 35). The deprotonation process can also be verified by the in situ Raman spectroscopy (Supplementary Fig. 38). In Ru5W1Ox, the peak at ca. 880 cm−1 decreased along with the potential increase, indicating the deprotonation of W-OHbri-Ru along with the potential increase. Detailed discussions on the in situ electrochemical XPS experiment refer to Supplementary Note 4.

To further understand the relationship between the Brønsted acidity of Obri and OER activity. We investigated the effect of introducing Brønsted acid sites into RuO2 using DFT calculations. We inserted the WO6 octahedrons into the stable RuO2 (110) facet and constructed two types of Obri sites: Ru-Obri-Ru and W-Obri-Ru34 (Fig. 5a inset). We then examined the adsorption energy (Eads) of hydrogen atoms (by assuming the energy of H+ + e− as the energy of 1/2 H2 molecule) on different Obri sites. The Ru-Obri-Ru demonstrated strong adsorption energy of H with an Eads of −1.04 eV, while the W-Obri-Ru showed mild H adsorption energy ranging from −0.39 eV to −0.50 eV (Fig. 5a). This indicated that protons tended to spontaneously adsorb onto Ru-Obri-Ru sites in acidic electrolytes. Thus extra energy input was needed to deprotonate the proton-saturated Ru-OHbri-Ru sites under OER conditions for pristine RuO2. In contrast, the low H adsorption energy on W-Obri-Ru enables much easier deprotonation of the OHbri (a stronger Brønsted acidity). Since the deprotonation of OHbri was regarded as the rate-limiting step in Ru-based catalysts at low overpotential8,35, we further calculated the kinetic barrier of the deprotonation on different Obri sites considering the effect of solvent (Supplementary Note 5, Supplementary Fig. 43 and 44). The W-OHbri-Ru model showed a lower barrier of deprotonation compared with Ru-OHbri-Ru, indicating a faster deprotonation process on W-OHbri-Ru (Fig. 5b). All these DFT results coincided with the electrochemical and XPS measurements, which well explained how the Brønsted acid sites promoted the OER kinetics. To further understand the pH-dependent activity of the Ru-W catalyst, we checked the Eads of protons on W-Obri-Ru with all Ru-Obri-Ru saturated by protons (Supplementary Fig. 40). The Eads of protons kept reducing along with the increase of hydrogen coverage and finally reached nearly thermal-neutral adsorption energy (−0.06 eV), indicating high proton mobility of W-doped RuO2 in strong acidic electrolytes.

a The H atom adsorption energy on different surface Obri sites. Inset: Schematic of different Obri sites on the W-doped RuO2. b The kinetic barrier of the deprotonation of OHbri on different catalysts with solvent. Insets: The snapshots of the initial state (IS), transition state (TS), and final state (FS) on W-doped RuO2. c The free energy diagram of W-RuO2 with different OER pathways. The active Ru site is marked yellow. Orange balls – Ru, Blue balls – W, White balls – O, Red balls – H. The orange and blue octahedrons represent RuO6 and WO6 octahedrons, respectively.

By integrating the above electrochemical, spectroscopic, and theoretical results, we finally proposed an OER pathway including BOAD steps on the W-doped RuO2 catalyst (Fig. 5c). In this mechanism, the Obri played a critical role in water dissociation and oxo-intermediates deprotonation. At each step, the adsorbed oxo-intermediate (or water molecule) first chemically transfers a proton to the neighboring W-Obri-Ru site, afterwards, the OHbri deprotonates accompanying an electron transfer. We calculated the thermodynamic OER overpotential of Ru5W1Ox based on both the BOAD pathway and conventional adsorbates evolution mechanism (AEM) pathway using DFT9. The BOAD pathway showed an overpotential of 0.41 V while the AEM showed an overpotential of 0.78 V–a 0.37 V improvement by the BOAD mechanism.

To extend our strategy of regulating Brønsted acidity of Obri in acidic water oxidation, we further replaced W with other metals (M = Cr, Mo, Nb, Ta, and Ti), which are often used as Brønsted acids or bases, to form rutile-type oxides and examined their OER performances (Fig. 6a). The hydrogen adsorption energy of M-Obri-Ru sites was also calculated using DFT. We found a linear relationship between the OER activity (represented by the TOF of Ru atoms) and the Eads of H atoms on Obri sites (Fig. 6b). The results showed that increasing the acidity of the Obri site on RuO2 could lead to easier deprotonation and accelerate the BOAD process, which confirms the validity of our modulating strategy.

a The mass-specific activity of different catalysts in 0.5 M H2SO4 based on total metal loading. Scan rate: 5 mV s−1. b The TOF value of different catalysts (regarding all metal atoms were active sites) as a function of H adsorption energy on Obri sites.

In summary, in this work, we demonstrated a strategy to modify the Brønsted acidity of bridging oxygen sites in RuO2 to improve acidic water oxidation. The incorporation of Brønsted acid sites (e.g. WOx) could optimize the proton adsorption energy of bridging oxygen sites. The electrochemical, in-situ and ex-situ X-ray spectroscopic and theoretical studies proved that: these W-Obri-Ru bridging oxygen sites increased the mobility of protons on the catalyst surface and led to a fast bridging-oxygen-assisted deprotonation process, thus accelerating the OER kinetics. This strategy was proved to be universal in other Ru-M binary metal oxides (M = Cr, Mo, Nb, Ta, and Ti), and all catalysts demonstrated an excellent linear relationship between the OER activity and the Eads of protons on Obri sites. This work provides new insights into the OER mechanism and broadens the designing principles for new high-performance electrocatalysts.

All the calculations were performed by periodic DFT with the Vienna Ab-initio Simulation Package (VASP) code36. The projector augmented wave (PAW) method was used to describe the interaction between the atomic cores and electrons37,38. The kinetic energy cut-off for the plane-wave expansion was set to 400 eV, and the Brillouin-zone integrations for the adsorption model were sampled using a (3 × 3 × 1) Monkhorst–Pack mesh39. The generalized gradient approximation (GGA) with PBE functional was used40. The convergence thresholds of the energy change and the maximum force for the geometry optimizations were set to 10−6 eV and 0.03 eV/Å, respectively. A vacuum of 15 Å in the z-direction was employed to avoid the interactions between periodic images.

For the chemisorption on W modified RuO2 (110) surface, many possible adsorption configurations were explored, and the thermodynamic stability of different structures was determined by the adsorption energy (ΔEads) that was defined as,

where E*M and E* represent the total energies of catalyst surface with and without adsorbate, respectively; EM is the total energy of adsorbate. All of them are available from the DFT calculation.

The computational hydrogen electrode (CHE) model41 was employed to calculate the Gibbs free energy change (ΔG) for each elementary reaction step and construct the free energy diagram for the OER. The ΔG was computed using the following:

where ΔE is the reaction energy between the initial state and the final state of the elementary reaction, which is available from DFT total energy; the correction of zero-point energy (ΔZPE) and entropy at T = 298.15 K (TΔS) can be obtained from vibrational frequency calculations. ΔGU = nU, where n and U stand for the number of electrons transferred and the applied electrode potential, respectively. ΔGpH = kBT × ln10 × pH, where kB is the Boltzmann constant. The free energy change between 1/2 H2 and H+ + e− will be zero at the potential of 0 V and 1/2 G(H2) can be equal to the free energy of proton and electron.

To simulate the interaction at the water/(W-doped)RuO2 interface, we used 18 explicit water molecules (6 layers) on a 2 × 1 RuO2 surface slab (3 layers) with an area of 6.28 × 6.42 Å2. The simulation box is 28 Å along the z-axis. The initial structure of the water box is based on the density of the solvent42,43 (as shown in Supplementary Fig. 43). To equilibrate the waters interacting with the interface, we carried out 850 steps (time step is 1 fs) of ab initio molecular dynamics (AIMD) simulation at 298 K44. The temperature and potential energies during the AIMD simulation are shown in Supplementary Fig. 44. To calculate deprotonation barriers of adsorbed H, we made use of the climbing image nudged elastic band (CI-NEB) method45 based on the established models.

The Ru-W binary oxide catalysts were synthesized by a sol-gel method. In a typical procedure, 0.75 mmol ruthenium trichloride hydrate (RuCl3·xH2O, Sigma-Aldrich) and 0.15 mmol tungsten hexachloride (WCl6, Sigma-Aldrich) were first dissolved in 3 mL N, N-dimethylformamide (DMF) and cooled in a refrigerator for 2 h. Then 200 μL of deionized water was added. In the meantime, 500 μL propylene oxide (Sigma-Aldrich) was dropwise added into the solution using a syringe pump under stirring. The solution was then placed and aged overnight before the reaction was quenched by adding acetone. The formed precipitations were washed with acetone 3 times and dried in the vacuum. The dried powder was then grounded and annealed at 500 °C for 1 h to obtain the final catalyst.

To synthesize other reference catalysts, the same procedure was used by adjusting the ratio of precursors (the total amount of metal precursors was controlled at 0.9 mmol) or changing the metal precursors. The synthesis of Ru-M (M = Cr, Mo, Nb, Ta, and Ti) followed the same procedure with Ru5W1Ox. Chromium chloride hexahydrate (CrCl3·6H2O), molybdenum chloride (MoCl5), niobium chloride (NbCl5), tantalic chloride (TaCl5), and titanium tetrachloride (TiCl4) (all purchased from Sigma-Aldrich) were used as metal precursors. The RuO2 nanoparticles (~25 nm) were purchased from Sigma-Aldrich without further treatment. The commercial IrO2 nanoparticles (~20 nm) were purchased from PERIC Inc.

The X-ray diffraction (XRD) patterns of prepared catalysts were measured by a Bruker D8A diffractometer. The Brunauer-Emmett-Teller surface area of the catalysts was obtained by a Quantachrome Autosorb-iQ analyzer. An FEI Tecnai G20 transmission electron microscope (TEM) was used to obtain the high-resolution TEM (HR-TEM) images and corresponding energy-dispersive X-ray spectroscopy (EDX) elemental mapping were from with an Oxford energy disperse spectrometer. The spherical aberration corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images were obtained by a Titan G2 300 kV TEM (Thermo Fisher Scientific).

The hard (Ru K-edge and W L3-edge) X-ray Absorption spectroscopies (XAS) measurements were carried out at the 1W1B beamline of the Beijing Synchrotron Radiation Facility (BSRF), respectively. The XAS data were processed, normalized, and fitted using the Demeter software package embedded with FEFF 8.5 codes46. The wavelet transformation of EXAFS spectra was performed by WTEXAFS software47.

The 1H solid-state nuclear magnetic resonance (1H-NMR) spectroscopy was performed on a Bruker 400WB AVANCE III spectrometer. The catalysts powder was dehydrated at 300 °C in the air for 2 h before measurements.

The evaluation of electrochemical performance was carried out in a three-electrode system. All electrolytes were purged by argon to remove the dissolved oxygen during measurements. To prepare the working electrode (WE), 5 mg catalyst powder, 2 mg carbon black (XC-72), 980 μL mixed solution (water: ethanol = 5:1, v/v), and 20 μL Nafion solution (5 wt%, Sigma-Aldrich) were mixed and sonicated to form a homogeneous ink. Then, 4.5 μL ink (catalyst loading = 0.0225 mg) was drop-cast onto a clean glassy carbon rotating disk electrode (RDE, Autolab, 3 mm in diameter) and dried at room condition. All electrochemical measurements were carried out by a Metrohm Autolab PGSTAT204 potentiostat. A saturated mercurous sulfate electrode (MSE, E0 = 0.652 V vs. RHE) was used as the reference electrode (RE) and a Pt foil was used as the counter electrode (CE). The measured potential was calibrated to the RHE scale according to:

To evaluate the OER activity of different catalysts, the WEs were first performed 10 CV cycles between 0.95 to 1.50 V vs. RHE (before iR-correction) at a 50 mV s−1 scan rate to clean and stabilize the surface, then followed with an LSV scan from 0.95 to 1.65 V at 5 mV s−1 scan rate and 2500 rpm rotation speed. For the pH-dependent activity measurement, 0.05, 0.1, 0.25 and 0.5 M H2SO4 solution (pH = 1.1, 0.7, 0.4, 0.2, respectively. Measured by a Horiba D-71 pH meter) was used as electrolyte without adding buffer salt. The methanol oxidation was measured in 0.5 M H2SO4 containing different concentrations of methanol. The steady-state Tafel slope was measured by elevating the potential from 1.25 to 1.75 V vs. RHE by 20 mV each step. Each step was maintained for 10 s. The uncompensated solution resistances (RΩ) were measured by extrapolating the electrochemical impedance semi-circle to the high-frequency end, which was ca. 7 Ω for each electrode in 0.5 M H2SO4.

The turnover frequency values were calculated according to the following equation:

where j is the current density at 1.53 V vs. RHE after 95% iR compensation, A is the geometric area of GCE (0.0706 cm2), η is the Faradic efficiency and e is the charge of an electron (1.602 × 10−19 C) and n is the number of active sites.

The active site number n was determined by assuming all Ru atoms (or all metal atoms) as active sites (underestimating case), according to the following equation:

where mloading is the loading mass of the catalyst. NA is Avogadro’s constant (6.022 × 1023 mol−1), Mw is the molecular weight of catalysts (estimated by the molecular formula Ru5W1O13 for Ru5W1Ox) and nmetal is the number of Ru atoms or metal atoms per molar of catalysts.

The stability measurements were carried out by air-brush spraying the catalysts powder onto the carbon paper (TGP-H-060, Toray). The catalyst loading was ca. 1.5 mg cm−2. The electrolysis cell was kept in a 25 °C constant temperature water bath. 100 μL of water was added to the cell every four days to keep the concentration of the electrolyte constant.

In this paper, we used mercury underpotential deposition48,49 (Hg-UPD) and electrochemical double-layer capacitance (Cdl) to evaluate the ECSA of different catalysts. To prepare the WE, 2 mg catalysts powder and 1 mg XC-72 carbon black were sonicated in 2 mL water/ethanol mix solution containing 20 μL Nafion solution and 3 μL obtained ink was drop-casted on the RDE. The catalyst loading was 42.5 μg cm−2.

For the Hg-UPD method, the fresh electrode was first cycled in Ar-purged 0.1 M HClO4 at −0.15 to +0.65 V vs. MSE to obtain the background (50 mV s−1, 1600 rpm). Then, the same electrode was moved to an Ar-purged 0.1 M HClO4 electrolyte containing 1 mM Hg(NO3)2 (Alfa Aesar) and cycled under the same condition. The current difference of the cathodic scans between the Hg-containing solution and blank background was integrated to calculate the amount of Hgupd. A coulombic charge of 138.6 μC cm−2 was used as a factor to obtain the Hgupd-ECSA values.

For the double-layer capacitance method, the Cdl values were obtained by conducting CV cycles at various scan rates from 20 mV s−1 up to 200 mV s−1 in Ar-purged 0.5 M H2SO4. The CVs were scanned between 0.20 and 0.30 V vs. MSE. The cathodic and anodic charging currents measured at 0.25 V vs. MSE (close the open circuit potential) were plotted as a function of scan rate. The average slope of the anodic and cathodic plot is the Cdl value. A general specific capacitance (Cs) of 35 μF cm−2 was used to calculate the Cdl-derived ECSA50.

The AP-XPS spectra were measured at the BL02B01 beamline of Shanghai Synchrotron Radiation Facility51 (SSRF). The incident photon energy was set to 735 eV to distinguish the surface species. To measure the adsorption isotherm of water vapor, the powder catalysts were first tableted and mounted into the analysis chamber. Before the measurements, the catalysts were first heated to 250 °C under 0.1 mbar O2 atmosphere for 30 min to remove the adsorbed water and carbon species. Then, the chamber was pumped back to UHV and returned to room temperature. Ru 3d, O 1 s, and W 4 f XPS spectra were collected at this stage and regarded as the initial state. In the following experiments, different amount of water vapor was injected into the chamber successively, and the XPS spectra were measured under different conditions. For each catalyst, two independent measurements were performed to ensure the validity of the results. Other details of the NAP-XPS experiment are described in Supplementary Note 2.

The in situ electrochemical XPS experiments were also carried out at the BL02B01 of SSRF, using a homemade electrochemical cell. The design of the electrochemical cell was similar to the cell reported by Falling et al.52. The cell was equipped with a gold-coated titanium lid as the WE and a Pt foil as the CE and RE. A Nafion 117 proton-exchange membrane (PEM) was used to seal the electrolyte from the vacuum. To prepare the sample, the interested catalysts were first spray-coated onto the PEM and hot-pressed at 140 °C, then boiled the catalyst-coated membrane in 0.5 M H2SO4 and deionized water to remove the impurities. During the measurements, the cell was filled with 0.05 M H2SO4 as the cathodic electrolyte (the anodic electrolyte was the PEM). The pressure of the XPS chamber was maintained at 0.25 mbar by injecting water vapor to relieve the evaporation of electrolytes and provide reactant. The incident photon energy was set to 735 eV to distinguish the surface species. A Biologic SP-200 potentiostat was used to apply potentials. The CE of the cell was grounded to the electron energy analyzer so that the potential of the WE can be directly controlled by the potentiostat. At each potential, an Au 4f spectrum on the lid was measured to calibrate the binding energy. Other details of the in situ XPS experiment are described in Supplementary Note 3.

The Raman spectra of the powder catalysts were measured either on a Horiba XploRA or a Renishaw In Via Qontor Raman spectrometer. The in situ electrochemical Raman spectroscopy was performed on a Horiba XploRA Raman spectrometer equipped with a 60× waterproof objective and a 638 nm laser. In the in situ measurements, a homemade electrochemical cell, equipped with a saturated Ag/AgCl reference electrode and a Pt wire counter electrode, was used. The spectra were collected at the steady-state under different applied potentials. Each spectrum was integrated for 10 s and averaged by two exposures.

Further information on research design is available in the Nature Research Reporting Summary linked to this article.

The authors declare that all data supporting the results of this study are available within the paper and its supplementary information files or from the corresponding author upon reasonable request. The electrochemical data of OER performances is provided as the Source Data in this paper. Source data are provided with this paper.

Seh, Z. W. et al. Combining theory and experiment in electrocatalysis: Insights into materials design. Science 355, eaad4998 (2017).

Seitz, L. C. et al. A highly active and stable IrOx/SrIrO3 catalyst for the oxygen evolution reaction. Science 353, 1011–1014 (2016).

Article  ADS  CAS  PubMed  Google Scholar 

Huang, J. E. et al. CO2 electrolysis to multicarbon products in strong acid. Science 372, 1074–1078 (2021).

Article  ADS  CAS  PubMed  Google Scholar 

Suntivich, J. et al. Design principles for oxygen-reduction activity on perovskite oxide catalysts for fuel cells and metal-air batteries. Nat. Chem. 3, 546–550 (2011).

Article  CAS  PubMed  Google Scholar 

Cheng, F. & Chen, J. Metal-air batteries: from oxygen reduction electrochemistry to cathode catalysts. Chem. Soc. Rev. 41, 2172–2192 (2012).

Article  CAS  PubMed  Google Scholar 

Li, Y. et al. Oxygen evolution and corrosion behaviors of co-deposited Pb/Pb-MnO2 composite anode for electrowinning of nonferrous metals. Hydrometallurgy 109, 252–257 (2011).

Spöri, C., Kwan, J. T. H., Bonakdarpour, A., Wilkinson, D. P. & Strasser, P. The stability challenges of oxygen evolving catalysts: towards a common fundamental understanding and mitigation of catalyst degradation. Angew. Chem. Int. Ed. 56, 5994–6021 (2017).

Rao, R. R. et al. Operando identification of site-dependent water oxidation activity on ruthenium dioxide single-crystal surfaces. Nat. Catal. 3, 516–525 (2020).

Rossmeisl, J., Qu, Z. W., Zhu, H., Kroes, G. J. & Norskov, J. K. Electrolysis of water on oxide surfaces. J. Electroanal. Chem. 607, 83–89 (2007).

Diaz-Morales, O., Ferrus-Suspedra, D. & Koper, M. T. M. The importance of nickel oxyhydroxide deprotonation on its activity towards electrochemical water oxidation. Chem. Sci. 7, 2639–2645 (2016).

Article  CAS  PubMed  PubMed Central  Google Scholar 

Grimaud, A. et al. Activating lattice oxygen redox reactions in metal oxides to catalyse oxygen evolution. Nat. Chem. 9, 457–465 (2017).

Article  CAS  PubMed  Google Scholar 

Nong, H. N. et al. Key role of chemistry versus bias in electrocatalytic oxygen evolution. Nature 587, 408–413 (2020).

Article  ADS  CAS  PubMed  Google Scholar 

Rao, R. R. et al. Towards identifying the active sites on RuO2(110) in catalyzing oxygen evolution. Energy Environ. Sci. 10, 2626–2637 (2017).

Over, H. Fundamental studies of planar single-crystalline oxide model electrodes (RuO2, IrO2) for acidic water splitting. ACS Catal. 11, 8848–8871 (2021).

Xu, B., Sievers, C., Hong, S., Prins, R. & Vanbokhoven, J. Catalytic activity of Brønsted acid sites in zeolites: Intrinsic activity, rate-limiting step, and influence of the local structure of the acid sites. J. Catal. 244, 163–168 (2006).

Wachs, I. E., Kim, T. & Ross, E. I. Catalysis science of the solid acidity of model supported tungsten oxide catalysts. Catal. Today 116, 162–168 (2006).

Trickett, C. A. et al. Identification of the strong Bronsted acid site in a metal-organic framework solid acid catalyst. Nat. Chem. 11, 170–176 (2019).

Article  CAS  PubMed  Google Scholar 

Zhang, B. et al. Homogeneously dispersed multimetal oxygen-evolving catalysts. Science 352, 333–337 (2016).

Article  ADS  CAS  PubMed  Google Scholar 

El-Basiouny, M. S., Hassan, S. A. & Hefny, M. M. On the electrochemical behaviour of tungsten: the formation and dissolution of tungsten oxide in sulphuric acid solutions. Corros. Sci. 20, 909–917 (1980).

Miu, E. V., Mpourmpakis, G. & McKone, J. R. Predicting the energetics of hydrogen intercalation in metal oxides using acid-base properties. ACS Appl. Mater. Interfaces 12, 44658–44670 (2020).

Article  CAS  PubMed  Google Scholar 

Jiang, P., Xiao, Y., Yu, X. & Liu, W. Study on mechanism of hydrogen adsorption on WO3, W20O58, and W18O49. Int. J. Quantum Chem. 120, e26072 (2019).

Lyons, M. E. & Floquet, S. Mechanism of oxygen reactions at porous oxide electrodes. Part 2–Oxygen evolution at RuO2, IrO2 and IrxRu1-xO2 electrodes in aqueous acid and alkaline solution. Phys. Chem. Chem. Phys. 13, 5314–5335 (2011).

Article  CAS  PubMed  Google Scholar 

Huang, Y. F., Kooyman, P. J. & Koper, M. T. Intermediate stages of electrochemical oxidation of single-crystalline platinum revealed by in situ Raman spectroscopy. Nat. Commun. 7, 12440 (2016).

Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

Koper, M. T. M. Blank voltammetry of hexagonal surfaces of Pt-group metal electrodes: Comparison to density functional theory calculations and ultra-high vacuum experiments on water dissociation. Electrochim. Acta 56, 10645–10651 (2011).

Arminio-Ravelo, J. A., Jensen, A. W., Jensen, K. D., Quinson, J. & Escudero‐Escribano, M. Electrolyte effects on the electrocatalytic performance of iridium‐based nanoparticles for oxygen evolution in rotating disc electrodes. ChemPhysChem 20, 2956–2963 (2019).

Article  CAS  PubMed  Google Scholar 

Dang, Q. et al. Iridium metallene oxide for acidic oxygen evolution catalysis. Nat. Commun. 12, 6007 (2021).

Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

Giordano, L. et al. pH dependence of OER activity of oxides: Current and future perspectives. Catal. Today 262, 2–10 (2016).

Hunger, M. BrØnsted acid sites in zeolites characterized by multinuclear solid-state NMR spectroscopy. Catal. Rev. 39, 345–393 (1997).

Fu, R., Ma, Z. & Zheng, J. P. Proton NMR and dynamic studies ofhydrous ruthenium oxide. J. Phys. Chem. B 106, 3592–3596 (2002).

Zhang, J. et al. Advances in thermodynamic-kinetic model for analyzing the oxygen evolution reaction. ACS Catal. 10, 8597–8610 (2020).

Tao, H. B. et al. A general method to probe oxygen evolution intermediates at operating conditions. Joule 3, 1498–1509 (2019).

Rao, R. R. et al. Surface orientation dependent water dissociation on rutile ruthenium dioxide. J. Phys. Chem. C. 122, 17802–17811 (2018).

Khyzhun, O. Y. XPS, XES and XAS studies of the electronic structure of tungsten oxides. J. Alloy. Compd. 305, 1–6 (2000).

Watanabe, E., Rossmeisl, J., Björketun, M. E., Ushiyama, H. & Yamashita, K. Atomic-scale analysis of the RuO2/water interface under electrochemical conditions. J. Phys. Chem. C. 120, 8096–8103 (2016).

Fang, Y. H. & Liu, Z. P. Mechanism and Tafel lines of electro-oxidation of water to oxygen on RuO2(110). J. Am. Chem. Soc. 132, 18214–18222 (2010).

Article  CAS  PubMed  Google Scholar 

Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).

Article  ADS  CAS  Google Scholar 

Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).

Article  ADS  CAS  Google Scholar 

Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).

Monkhorst, H. J. & Pack, J. D. Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188–5192 (1976).

Article  ADS  MathSciNet  Google Scholar 

Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).

Article  ADS  CAS  PubMed  Google Scholar 

Peterson, A. A., Abild-Pedersen, F., Studt, F., Rossmeisl, J. & Nørskov, J. K. How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels. Energy Environ. Sci. 3, 1311–1315 (2010).

Baer, M., Marx, D. & Mathias, G. Theoretical messenger spectroscopy of microsolvated hydronium and Zundel cations. Angew. Chem. Int. Ed. 49, 7346–7349 (2010).

Ertem, M. Z. et al. Photoinduced water oxidation at the aqueous GaN (101̅0) interface: Deprotonation kinetics of the first proton-coupled electron-transfer step. ACS Catal. 5, 2317–2323 (2015).

Tuckerman, M. E. Ab initio molecular dynamics: basic concepts, current trends and novel applications. J. Phys.: Condens. Matter 14, R1297–R1355 (2002).

Henkelman, G., Uberuaga, B. P. & Jónsson, H. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. J. Chem. Phys. 113, 9901–9904 (2000).

Article  ADS  CAS  Google Scholar 

Ravel, B. & Newville, M. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT. J. Synchrotron Rad. 12, 537–541 (2005).

Xia, Z. A tool to make wavelet transformation of EXAFS, https://github.com/hellozhaoming/wtexfas (2018).

Alia, S. M., Hurst, K. E., Kocha, S. S. & Pivovar, B. S. Mercury underpotential deposition to determine iridium and iridium oxide electrochemical surface areas. J. Electrochem. Soc. 163, F3051–F3056 (2016).

Duran, S. et al. Electrochemical active surface area determination of iridium‐based mixed oxides by mercury underpotential deposition. ChemElectroChem 8, 3519–3524 (2021).

McCrory, C. C., Jung, S., Peters, J. C. & Jaramillo, T. F. Benchmarking heterogeneous electrocatalysts for the oxygen evolution reaction. J. Am. Chem. Soc. 135, 16977–16987 (2013).

Article  CAS  PubMed  Google Scholar 

Cai, J. et al. An APXPS endstation for gas–solid and liquid–solid interface studies at SSRF. Nucl. Sci. Tech. 30 (2019).

Falling, L. J. et al. Graphene-capped liquid thin films for electrochemical operando X-ray spectroscopy and scanning electron microscopy. ACS Appl. Mater. Interfaces 12, 37680–37692 (2020).

Article  CAS  PubMed  PubMed Central  Google Scholar 

This work was supported by NSFC (21875042, 21902179, and 22173067), STCSM (21DZ1207102 and 21DZ1207103), and the National Key R&D Program of China (Grant No. 2017YFA0204800). This work was also supported by the Program for Eastern Scholars at Shanghai Institutions. The authors thank BL02B01 of SSRF supported by NSFC No. 11227902. The authors thank Prof. Liqiang Zhang of Yanshan University for the spherical aberration corrected HAADF-STEM experiment. H.Z. acknowledges the support of the Shanghai Sailing Program (Grant No. 19YF1455600). F.P.G.d.A. thanks the CEX2019-000910-S [MCIN/AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, the Generalitat de Catalunya through CERCA, and La Caixa Foundation.

These authors contributed equally: Yunzhou Wen, Cheng Liu.

State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China

Yunzhou Wen, Rui Huang & Bo Zhang

Institute of Functional Nano & Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, Suzhou, 215123, China

Cheng Liu & Youyong Li

State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, 200050, China

Hui Zhang, Xiaobao Li & Zhi Liu

ICFO - Institute of Photonic Sciences, The Barcelona Institute of Science and Technology, Barcelona, ​​08860, Spain

F. Pelayo García de Arquer

School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai, 201210, China

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

You can also search for this author in PubMed  Google Scholar

B.Z. and Y.W. conceived and designed the experiments. Y.W. and R.H. synthesized the materials and performed the electrochemical measurements. C.L.and Y.L. performed the DFT calculations and analysis. Y.W., X.B.L., H.Z., and Z.L. designed and participated in the in situ XPS measurements. F.P.G.d.A. participated in the discussion and interpretation of experimental and theoretical data. B.Z. and Y.W. wrote the manuscript. All of the authors discussed the results and commented on the manuscript.

Correspondence to Youyong Li or Bo Zhang.

The authors declare no competing interests.

Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Wen, Y., Liu, C., Huang, R. et al. Introducing Brønsted acid sites to accelerate the bridging-oxygen-assisted deprotonation in acidic water oxidation. Nat Commun 13, 4871 (2022). https://doi.org/10.1038/s41467-022-32581-w

DOI: https://doi.org/10.1038/s41467-022-32581-w

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Nature Communications (Nat Commun) ISSN 2041-1723 (online)

Introducing Brønsted acid sites to accelerate the bridging-oxygen-assisted deprotonation in acidic water oxidation | Nature Communications

Electro Galvanized Iron Binding Wire Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.